The toolkit must be downloaded before :
donwload Odin click here
download TWRP click here (Or from the officiel site TWRP )
download SuperSU click here
download official firmware click here
Odin is a PC software used internally at all Samsung service centers for updating/flashing Firmware to Samsung devices. This software was never meant to go public but thanks to the growing world of Samsung’s Galaxy devices, Odin is now used by general users for all sorts of things like flashing stock Samsung ROMs, custom kernels and custom recoveries like TWRP.
For the unknown, TWRP recovery is a custom recovery developed and maintained by the folks over at TeamWin. Using TWRP, you can take full device (nandroid) backups, plus install/flash rooting scripts like SuperSU, Custom ROMs/MODs and other similar stuff.
TWRP recovery is available as both official and unofficial builds because it’s an open source project and anyone with knowledge can compile the recovery for any Android device.
You can download TWRP recovery for your device from TeamWin’s official repository for the recovery. And in case you don’t find your device listed there, do a search for it on our website once. We cover both official and unofficial TWRP builds from various Android community forums such as XDA on a regular basis. So you might find an unofficial TWRP build for your device on our site.
How to Flash TWRP recovery using Odin
- Unzip the Odin 3.12.3 .zip file and run/open Odin3 v3.12.3.exe file from the extracted files on your PC.
- Make sure you’ve downloaded a Odin flashable TWRP recovery .tar file compatible for your device.
- (If applicable) Enable OEM unlock:
- Go to Settings » About phone » and tap Build number seven times to enable Developer options.
- Go back to main Settings page, scroll to bottom and select Developer options from there.
- Under Developer options, look for Enable OEM unlock checkbox/toggle and enable it.
- Boot your device into Download mode:
- Switch off your device.
- Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
- Press Volume Up on the warning screen to accept it and boot into Download mode.
- Once your device is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the device and show an “Added!!” message.
- Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
└ Note: DON’T play with any other options on the screen. You’re only required to connect your device and select the TWRP recovery .tar file in the AP tab. - Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Odin screen.
- Your device will automatically reboot when Odin is done flashing. You can then disconnect your device.
How to boot into TWRP recovery on a Samsung Galaxy device
- Switch off your device.
- Press and hold “Home + Power + Volume Up” buttons for a few seconds and as soon as you see your device’ logo on-screen, release three buttons altogether. Your device will boot into TWRP recovery.
Happy Androiding!
How to Flash SuperSU using TWRP recovery and Root any Android device
How to Flash SuperSU zip via TWRP Recovery
- Download and transfer the SuperSU zip file from the download link above to your device’s storage.
- Boot your device into TWRP recovery.
- Tap on Install and select the SuperSU zip file that you transferred to your device in Step 1.
- After selecting the .zip file, do Swipe to Confirm Flash on the bottom of screen to begin the flashing process.
- Once SuperSU is flashed, you’ll get Reboot System option, select it.
Congratulations! Your device should be rooted now. Look for the SuperSU app in app drawer.